![]() ![]() Enter an Export directory to save the file to, give your file a name and set any required settings to suit your Laser engraver and click Apply. Then click on the Extensions menu and select the 305 Engineering extension and then click Raster 2 Laser Gcode generator. To see if it works open Inkscape and create your image/design. Close the file and when asked if you want to save it click YES. After the last entry that says coordinate offset\n') press enter to make a space and type in: file_gcode.write('G0 \n') file_gcode.write('Z0 \n') Step 6. Scroll down through the text until you get to here: #Configurazioni iniziali standard Gcode file_gcode.write(' Generated with:\n "Raster 2 Laser Gcode generator"\n by 305 Engineering\n \n \n \n') #HOMING if = 1: file_gcode.write('G28 home all axes\n') elif = 2: file_gcode.write('$H home all axes\n') else: pass file_gcode.write('G21 Set units to millimeters\n') file_gcode.write('G90 Use absolute coordinates\n') file_gcode.write('G92 Coordinate Offset\n') #Creazione del Gcode Step 5. If you are using the 64 bit version of Inkscape it will be in C/Program Files/Inkscape/Share/Extensions Step 3. Make a copy of it and keep it safe in case you need to replace it at some time. The file you need is: raster2laser_gcode.py Step 2. Open C/Program Files (x86)/Inkscape/Share/Extensions and look for the 305 Engineers GCode files. The code would appear in the bottom window but no image. For me, this was on the line 5864 where inkex.unittouu() is called.When I first started using GRBLControl with GCode generated by the 305 Engineers GCode Generator for Inkscape extension, the image would not appear in the visualiser window. The solution is to update the gcodetools.py as follows. Open Inkscape preferences, usually here: ~/.config/inkscape/preferences.xmlĪfter running gcodetools extension you may get the error:ĪttributeError: 'module' object has no attribute 'unittouu'.Change the default version for python to be 2.7 like this: There might be problems with running the extensions. It appears to be written for Python 2, while the newest Inkscape appears to be running Python 3. Gcodetools is an extension for Inkscape for G-code export. On Windows or MacOS you may encounter similar problems, depending on your software, e.g. The following notes are for using Inkscape on Linux, e.g. You may create files "header" and "footer" ant place in the Gcode file directory prior to generation, then they will be included in the final file rather than the default header and footer. After creating the Gcode file you may have to edit the header and footer sections, for example, to select the laser and turn it off for your device.Open the new Gcode file and make the necessary edits.Select tab: Preferences => enter File name and the Directory as appropriate.Extensions => Gcodetools => Path to Gcode. ![]() ![]() You may see no difference until the next step.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |